Tauri Scanners FAQ's
+/- 0.3 degree Celsius
Yes, it would, people would still need to enter one by one.
We have a ready app that detects temperature and locks down through STAROS.
This is currently in development with TAURI Cloud.
There’s a visible sensor and a camera that will show your face through the LCD screen. From there you can see your head and also temperature.
There is a camera in the tablet; as long as you can see your face in the screen, it will show.
Need to place head within 0.5 meter from the sensor for accurate reading.
The accuracy is at 0.3 degree Celsius which is provided by our component manufacturer located in Germany.
Around 1800 People.
It can get heated up upon long term use, but we have heat dissipation design to withstand this.
VESA 100 x 100 or 75 x 75
TAURI is a total solution of hardware, software and user interface.
On the display screen, it would show the person’s face, the person’s current temperature, and when it runs a temperature higher than what you have set as normal, the tablet would have an alert sound made.
You are able to customize settings to set temperature threshold.
Right now it’s just plug and play, no special configuration required.
On Version 2.02 or above, there are French, Japanese, German additionally available.
It’s not an approved FDA medical device, undetermined if this classifies as a medical device as it is not making any diagnosis.
Yes, it is EN 60950-1:2006+ A11:2009+A1:2010+A12:2011+A2:2013.
FCC Rule Parts 15C.
Yes, it is NDAA compliant.
No, the sensor detects actual physical temperature. Usually when this happens, you need to do an independent check with that person.
TAURI sensor has been calibrated with a thermal black body before shipment.
When the sensor activates, it takes 2-3 minutes to auto calibrate to reach thermal stability.
If it’s already been calibrated before shipment, TAURI will also auto calibrate itself when it boots up.
Yes, after Sept 2020 orders, you can connect TAURI to a secondary monitor to display the same content as TAURI, however, there are no sound, only image.
Currently, TAURI is designed in landscape mode. But the new TAURI 7 will be in portrait mode.
No it does not, it only needs to be connected to WIFI during the OTA ( over the air) update.
Right now it is at constant on, however there's a power button at the back that you can press that will black out the screen like cellphone.
Tauri is DSGVO compliant.